Strength of Stone.--Stone should only be subjected to a compressive
strain. It is occasionally subject to a cross strain, as in lintels
over doors and windows; these are, however, contrary to the true
principles of construction, and should not be allowed except a
strong relieving arch is turned over them. The strength of stone in
compression is about 120 tons per square foot for the weakest stones,
and about 750 tons per square foot for the strongest. No stones are,
however, subjected to anything like this amount of compressive force;
in the largest buildings it does not amount to more than twelve or
fourteen tons per square foot.
Hardness of Stone.--This is of more importance than its strength,
especially in pavements or steps, where it is subject to great wear;
also in plinths and quoins of buildings where it is desired to preserve
a good face and sharp arris. The order of strength and hardness of stone
is--(1) Basalt, (2) granite, (3) limestone, (4) sandstone. Granite,
seinite, and gneiss take the first, place for strength, hardness and
durability, but they will not stand a high temperature. "Stones which
are of a fine, uniform grain, compact texture and deep color are the
strongest; and when the grain, color, and texture are the same, those
are the stongest which are the heaviest; but otherwise the strength does
not increase with the specific gravity." Great hardness is objectionable
when the stone has to be worked with a chisel, owing to the labor
required to work it.
Pages:
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568